Replacing The U.2 Nvme Drive - Nvidia DGX A100 Service Manual

Determine the manufacturer and model from the 'Model' entry in the output, and then request
a replacement NVMe from NVIDIA Enterprise Support, specifying this information.
7.3.

Replacing the U.2 NVMe Drive

1. Be sure you have requested and obtained the replacement drive from NVIDIA Enterprise
Support.
2. Back up any critical data to a network shared volume or some other means of backup.
3. Power off the system using the power button.
4. Remove the NVMe drive.
a). Push the lever release button (on the right side of the lever) to unlock the lever.
b). Pull the lever to remove the module.
5. Replace the new NVMe drive in the same slot.
a). Unlock the release lever and then slide the drive into the slot until the front face is
flush with the other drives.
b). Close the lever and lock it in place.
NVIDIA DGX A100 System
U.2 NVMe Cache Drive Replacement
DU-10044-001 _v01 | 29