Table of Contents
Advertisement
Remote Control Operation
Remote Control Operation
You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan
speed, and air flow direction.
English
18
CAC001-00_IB_RAC QMD_EU_EN-WEB_.indd 18
Operation modes
You can change the current mode between Auto, Cool, Dry, Fan, and
Heat by pressing the
button.
Controlling temperature
You can control the temperature in each mode as follows:
Mode
Auto/Cool/Dry
Adjust by 1 °C between 18 °C and 30 °C.
Fan
You cannot control the temperature.
Heat
Adjust by 1 °C between 16 °C and 30 °C.
You can switch between Celsius and Fahrenheit indications on the
remote control.
▶
Press and hold for 3 or more seconds.
NOTE
• The temperature indications on the indoor unit are not switched.
• This function is canceled when the remote control batteries are
replaced. In this case, run this function again.
Controlling fan speed
You can select the following fan speeds in each mode:
Mode
Auto/Dry
(Auto)
Cool/Heat
(Auto),
Fan
(Low),
(Med),
Temperature control
Available fan speeds
(Low),
(Med),
(High)
(High)
2020-02-05 오후 12:54:38
Hide quick links:
Advertisement
Table of Contents
