Cleaning - Samsung AC TNXDKG Series User Manual

Cleaning

CAC001-00_IB_RAC QMD_EU_EN-WEB_.indd 33
Auto clean function
Use the Clean function to remove moisture from the inside of the air
conditioner for preventing propagation of fungi, bacteria, etc.
▶
NOTE
• Depending on the condition of the indoor unit, the Clean
operation stops after running for 30 seconds to 20 minutes.
• When the Clean function is set, the Timer LED on the indoor unit
blinks 3 times for 3 seconds (OFF → ON → OFF → ON → OFF → ON
→ OFF → returns to the previous state). When the Clean function
is cancelled, the Timer LED on the indoor unit blinks once for 1
second (OFF → ON → OFF → returns to the previous state).
• You cannot use the Clean function after starting the Timed Off or
good'sleep function.
• If you turn on the air conditioner and then turn it off within
20 seconds, the Clean function does not operate.
• When the air conditioner is turned off, the Clean function
operates immediately. When it is turned on, the Clean function
operates after it is stopped.
• Once the Clean function is started, it automatically continues to
operate until it is cancelled.
Select
▶ ▶
Clean.
English
33
2020-02-05 오후 12:54:42