Remote Control Operation
Remote Control Operation
You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan
speed, and air direction.
English
14
Selecting an operation mode
To change the current mode between Auto, Cool, Dry, Fan, and Heat,
press the
(Mode) button.
You can use AI Auto mode after Wi-Fi is connected.
NOTE
You can use the Cool, Dry, and Heat modes in the following operation
range.
Mode
Cool
Indoor
temperature
(16 °C to 32 °C)
14 °F to 115 °F
Outdoor
temperature
(-10 °C to 46 °C)
Indoor
Relative humidity
humidity
environment for an extended period of time, condensation may
occur.
You can switch between Celsius and Fahrenheit indications on the
remote control.
Press and hold for 3 or more seconds.
NOTE
The temperature indications on the indoor unit are not switched.
This function is canceled when the remote control batteries are
replaced. In this case, run this function again.
Dry
Heat
(27 °C or less)
(18 °C to 32 °C)
14 °F to 115 °F
(-20.6 °C to 24 °C)
(-10 °C to 46 °C)
_
_