Important Safety Information - IBASE Technology IP417 User Manual

Mini-itx com express type 10 r3.0 carrier board
Table of Contents

Advertisement

Important Safety Information

Carefully read the precautions before using the board.
Environmental conditions:
Use this product in environments with ambient temperatures between -20˚C
and 70˚C.
Do not leave this product in an environment where the storage temperature
may be below -40° C or above 90° C. To prevent from damages, the product
must be used in a controlled environment.
Attention during use:
Do not use this product near water.
Do not spill water or any other liquids on this product.
Do not place heavy objects on the top of this product.
Anti-static precautions
Wear an anti-static wrist strap to avoid electrostatic discharge.
Place the PCB on an anti-static kit or mat.
Hold the edges of PCB when handling.
Touch the edges of non-metallic components of the product instead of the
surface of the PCB.
Ground yourself by touching a grounded conductor or a grounded bit of metal
frequently to discharge any static.
Danger of explosion if the internal lithium-ion battery is replaced by an incorrect
type. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's
instructions or recycle them at a local recycling facility or battery collection point.
iv
WARNING.
CAUTION
IP417 User's Manual

Advertisement

Table of Contents
loading

Table of Contents