Ricoh DDP 92 User Manual page 11

Amount of offset
Stapling capability
Stapling position
Stapling capacity5,000 staples / cartridge
Power source
Temperature and
Humidity
1-6
The allowable amount of paper curl with the following way is 10mm
maximum
Amount of paper curl
30 mm Note: Non-staple mode only
Maximum 50 sheets (75 g/m
A = 8.5 mm C = 82.5 mm E = 14 mm B = 8.5 mm D = 8.5 mm
1 place (Rear side) 2 places
Booklet mode (stapling and folding)
24V/5V (Supplied from the printer)
(1) Operation
Temperature
Humidity
(2) Recommended condition
Temperature
Humidity
O G L
5 sheets of printed paper
2
, 5.0 mm and below)
Paper feed direction
1 place (Front side)
: 10 to 32 ° C (50 to 89.6 ° F)
: 20 to 80 %
Wet Bulb 26 deg.C (78.8 ° F) max.
: 19 to 25 ° C (66.2 to 77 ° F)
: 40 to 60 %
0 0