Westinghouse W2602 BK User Manual page 14

4. Connect power cables
Connect the power cord to the LCD TV then to a properly grounded AC outlet.
5. Turn Power On
Press the Power ON button on the right side of the LCD TV, or press the Power ON
(Red) button on the remote control.
6. Select input source for the LCD TV using the OSD menu or remote
control
7. If connecting to Antenna, Cable or other RF source on TV Inputs:
See page 18 to auto scan and edit available channels.
If connecting to a PC (VGA/DVI):
8.
For the best picture quality, set the timing mode of you computer to 1280 x 720 at 75Hz.
Refer to the graphic card's user guide of you computer to set this timing mode.
LCD TV
12