Step 2-2-4 : Door Gasket - Detail
Door Gasket Sealing
Door Liner, Upper Flange
Door Liner, Upper Flange
Door Liner, Gasket Slot
Holder, Gasket Side
Step 3-2 : Harness Adapter (2008 models)
4. Connect the new harness adapter as shown.
(Excluding LFX23961xx)
Align with the top of
the door liner.
4
Step 3-1: Main PCB
1. Remove the cover,
PCB (3 or 4 screws).
5. Replace the Cover, PCB.
2. Disconnect all wiring
connectors from the Main
PCB.
3. Install the new Main PCB
and reconnect all electrical
wires.
6. Attach the yellow sticker on the
PCB Cover.