View Mode; View Mode (Vga) - Westinghouse LD-4655VX User Manual

SETUP MENUS

VIEW MODE

Use the View Mode sub-menu to select the aspect ratio of the display.
Press on the remote control or MENU on the control panel to display the setup
menu screen then select View Mode to display the View Mode sub-menu. The
following options are available: 1:1 Mode, Standard, Fill, and Overscan.
1:1 Mode
Matches the incoming resolution exactly to the pixels without any scaling.
Standard
Picture is displayed automatically according to the carried scaling information or its
original size.
Fill
Picture is displayed to cover the entire screen.
Overscan
Picture is scaled up to fit the display area.
Adjusting View Mode
1 Press the /
2 Press or

VIEW MODE (VGA)

Select VGA as your input source and use the View Mode sub-menu to adjust the
display in VGA mode.
Press on the remote control or MENU on the control panel to display the setup
menu screen then select View Mode to display the View Mode sub-menu. The
following options are available: Aspect Ratio, H. Position, V. Position, Fine Tune, and
Auto Sync.
36
keys on the remote control to select the desired option.
to save and exit the screen.