Contents Product Safety Instructions …………………..….………….………. 1 Antenna Installation Safety…………………………………….……. 2 Safety Guidelines…………………………………………….……..… 3 Cleaning the LCD TV…………………………………………….…… 4 INSTALLATION Package Content…………………………………….……………….. 5 Side View of the LCD TV…………………..………………………… 5 Front View of the LCD TV…………………….……………………… 6 Rear View of the LCD TV………..……………………………………7 Remote Controls…………………..…………………………………..
• Do not place heavy objects on the LCD TV, video cable, or power cord. • If the LCD TV emits smoke, abnormal noise, or a strange odor, immediately turn it off and contact the Westinghouse Service Center. • WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose...
Antenna Installation Safety Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the Westinghouse Service Center or an experienced radio/TV technician for assistance. FCC Warning To assure continued FCC compliance, the user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores.
Cleaning the LCD TV • MAKE SURE THE LCD TV IS TURNED OFF • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2.
INSTALLATION Package Content Your product package includes: • 30” LCD TV • Remote Control (with batteries) • Power Cord • Quick Connect Guide • User’s Manual • Component Video Cable (Green, Red, Blue) • Audio Cable (Red, White) Side View of the LCD TV A.
Front View of the LCD TV Use the buttons on the front panel control (or included remote control) to display and adjust the On Screen Display (OSD). The OSD controls are defined in “OSD Functions” on page 14. 1. Menu Turn OSD Menu ON/OFF 2.
Rear View of the LCD TV A. AC IN (Power) Connect the power cord from AC IN to a power source B. TV Input (RF-input) Connect to the antenna or cable service C. S-Video Input Connect to an external video device such as VCR, DVD or video game system D.
Remote Control The Remote Control will transmit to the LCD TV up to 23 feet away. 1. POWER: Switch the power On/Off 2. INPUT Select input source 3. CHANNEL NUMBER KEYS Select specific channels 4. LAST CH Switch to previous channel 5.
Installation 1. Insert Remote Control Batteries 1) Remove the battery cover. 2) Insert the batteries corresponding to the (+) and (−) marks on the battery compartment. 3) Re-attach the battery cover. CAUTION: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury.
Page 12
2. Connect audio and video cables to a PC Connect one or all of the following into the back of the LCD TV IMPORTANT: Before beginning, RGB CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to the LCD TV RGB IN port.
Page 13
4. Connect power cables Connect the power cord to the LCD TV then to a properly grounded AC outlet. 5. Turn Power On Press the Power ON button on the front of the LCD TV, or press the Power ON (Red) button on the remote control.
OSD Function All the function settings for the LCD TV are controlled either by the remote control or using the bottom control keys on the front panel. To display the OSD main menu, press the Menu button on the front control keys of the LCD TV or the MENU key on the remote control.
PICTURE PARAMETERS: Function Name Brightness Brightness adjustment Contrast Contrast adjustment Saturation Saturation adjustment Hue adjustment Color Temp Color temperature adjustment (Color 1, Color 2, Color 3) Sharpness adjustment Sharpness (Sharpness cannot be adjusted in PC mode) Aspect Ratio Set Display to "STANDARD" / "FILL" / "ZOOM" Backlight Backlight adjustment Reset...
PC PARAMETERS: Function Name Auto Adjust Automatically adjust the horizontal phase of the image Clock Clock adjustment Phase Phase adjustment Position Adjust the horizontal and vertical position of the image NOTE: The GRAPHIC menu is only available when RGB source is selected. Function...
AUDIO SETTINGS: Function Name Volume Volume adjustment Bass Bass adjustment Treble Treble adjustment Balance Balance adjustment MTS Selection NOTE: This function depends on the type of broadcast being received. Mute Select Audio OFF or ON Speaker Select internal or external speaker Reset Reset Audio settings Function...
MULTI SCREEN: Function Name Display Mode OFF --> PIP --> PBP --> POP Main Source Select main screen sources TV --> AV1 --> AV2 --> S-Video 1-->YPbPr1 --> YPbPr2 --> VGA --> DVI PIP Source Select sub screen sources Please see PIP/POP specification in Table 1 Swap Swap main and sub source PIP Position...
Function Name Select TV Source Type (AIR => Cable STD => Cable HRC TV / CATV => Cable IRC) Auto Scan Automatically detect available TV channels Channel EDIT Add / Delete the selected TV channel Turn the Close Caption OFF or CC1, CC2, CC3, CC4, TT1, Caption Mode TT2, TT3, TT4 PARENTAL CONTROLS:...
Page 20
Function Name MPAA Rating TV PG Rating TV Y: All children TV Y7: Directed to older children TV G: General audience TV PG: Parental guidance suggested TV 14: Parents strongly cautioned TV MA: Mature audience only Password Edit Change Password Function NONE: Not available G: General audience...
GENERAL SETTINGS: Function Name Menu Position OSD horizontal/vertical position adjustment Menu Timeout Set time to turn OFF the OSD Language OSD language Sleep Timer Set sleep timer Transparency Set OSD transparency level DPMS Select DPMS On/Off System Info Display Input source, type and signal Factory Reset Restore factory default settings Function...
Specifications Panel Type Color Viewing Angles Input Signal Video/Audio Output Signal HDTV Compatibility PC Compatible Supported Recommended 1280 x 768 @ 60Hz Speaker Output Power Voltage Operating Conditions Temperature Humidity Altitude Storage Conditions Temperature Humidity Altitude Dimensions Physical Weight Net / Gross Regulations Power saving Modes...
Troubleshooting No Power • Make sure power button is ON (Blue LED). • M ake sure AC power cord is securely connected to the AC socket. • Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage.
Page 24
• For the best TV image quality, “Standard Definition” TV should be viewed in 4:3 format. How Can I Find More Help? • Log on to: www.westinghousedigital.com • Contact Westinghouse Customer Service at (866) 287-5555 or write us at service@westinghousedigital.com...