Rear Panel I/O - MSI MS-98L9 Manual

Rear Panel I/O

Mouse/Keyboard
VGA Port
Combo Port
HDMI Port
USB2.0
Ports
Important
Installing the I/O shield
1. Open the case.
2. Put the I/O shield in from inside the case. Make sure the I/O shield is put in
the right orientation with motherboard I/O ports aligning with the holes in the
I/O shield.
3. Apply pressure to all four corners of the I/O shield to secure it to the case.
h Mouse/Keyboard Combo Port
The standard PS/2 mouse/keyboard DIN connector is for a PS/2
®
USB2.0 Ports
h
The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard,
mouse, or other USB-compatible devices.
USB3.0 Ports
h
The USB 3.0 port is backward-compatible with USB 2.0 devices and supports data
transfer rate up to 5 Gbit/s (SuperSpeed).
VGA Port
h
The DB15-pin female connector is provided for monitors.
GbE
RS232 COM
RJ45
Port 2
Port
RS232/422/485 USB3.0
Ports
COM Port 1
MS-98L9
GbE
Line-In
RJ45
Port
Line-Out
USB3.0
Ports Mic-In
mouse/keyboard.
®
2-9