Configuration Software
3.1 Get Device Data
3.1
Get Device Data
From the Reydisp Evolution software, download the settings, fault records and events records from the
connected 7SR45 Relay.
Get Settings
•
The settings from a device can be retrieved by using the Relay →Settings → Get Settings
command or by clicking the Get Settings icon shown below.
[sc_getsettings_icons, 1, --_--]
•
Select the required Settings Group (Group 1 or Group 2)
[sc_getwhichsettingsgroup, 1, --_--]
•
The settings editor window gets displayed on the Reydisp Evolution software which can be used to view/
edit the settings. Refer to
Get Fault Records
•
The fault data from a device can be retrieved by using the Relay → Data Records → Get Data
Fault Records command or by clicking the Get Data Fault Records icon shown below
[sc_GetDataFaultRecord, 1, en_US]
The fault data record is displayed in Reydisp Evolution software as follows:
[sc_fault data record, 1, en_US]
Figure 3-1
22
3.2 Settings Editor Window
Fault Data Record
for further details.
Reyrolle, Engineering Guide, Manual
C53000-G7040-C102-1, Edition 08.2020