Advertisement
Option SS : Smart Sound
Function: Enable/disable smart sound function
Values:
OFF = Disabled, Smart Sound command is ignored
ON = Enabled, Smart Sound command is processed
Option SP : Smart Picture
Function: Enable/disable smart picture function
Values:
OFF = Disabled, Smart Picture command is ignored
ON = Enabled, Smart Picture command is processed
Option RC : Remote Control Type
Function: Choose the type of remote control to be used
Values:
OFF = RC0702/04 remote control
ON = All other remote controls
Note: If changed when using the RC0702/04, this option can only be returned to the original setting
by option byte correction.
Option TW : Channel Select Time Window
Function: Select time window for channel selection
Values:
OFF = 2-second time window for channel selection
ON = 5-second time window for channel selection
Option SF : Surf
Function: Enable/disable the possibility to enter surf mode
Values:
OFF = Disabled, customer menu item Surf not available and A/CH command alternates
channels
ON = Enabled, customer menu item Surf available and A/CH command surfs or
alternates channels
Option VM : Video Mute (Channel Change)
Function: Enable/disable video mute during channel change
Values:
OFF = Disabled, no video mute during channel change
ON = Enabled, video muted during channel change
Option TN : Tuner Type
Function: Choose the tuner type that is configured in the hardware
Values:
OFF = Philips tuner (A Philips tuner will have the Philips name embossed on the side)
ON = ALPS tuner (An ALPS tuner will not have the Philips name embossed on the side)
Option FT : Fine Tuning
Function: Enable/disable fine tuning
Values:
OFF = Customer menu item fine tuning disabled
ON = Customer menu item fine tuning enabled
Option XT : AV1
Function: Enable/disable external input source 1 (Ext 1)
Values:
OFF = Disabled, external input source 1 (Ext 1) not available
ON = Enabled, external input source 1 (Ext 1) available
Option 2X : AV2
Function: Enable/disable external input source 2 (Ext 2)
Values:
OFF = Disabled, external input source 2 (Ext 2) not available
ON = Enabled, external input source 2 (Ext 2) available
Option CD : Auto Cable Detect
Function: Enable/disable automatic detection of Cable/Broadcast during autostore.
Values:
OFF = Disabled, autostore uses the selected Cable/Broadcast setting
ON = Enabled, autostore will detect and set Cable/Broadcast mode
Option BM : Blue Mute
Function: Enable/disable blue mute when no television station signal is present
Values:
OFF = Disabled, no blue mute when no television station signal is present
ON = Enabled, blue mute active when no television station signal is present
Advertisement
