Advertisement
Page: 5 of 9
Chassis: 19E8
Count the on flashes after the long flash and look up the error in the service manual.
It is important to remember that the change of position of the Service Mode pins
indicates a change in Memory IC Service Code and Micro-P program and Service Code.
TIP: The old memory IC will continue to be shipped (9322 097 23682) as it will work with
old or new Micro-P. The new memory IC will only work with the new Micro-P.
For All E8 and F8 except 13PT30, 20PT30, PR/XR1305, PR/XR1903, HD2511 and TR/XR2503
and ITV (commercial) the new Service Code is 9352 670 96112 (7600, micro-P). Until the
new code is available the current code (9352 645 55112) is shipped.
For PR/XR1305, PR/XR1903, HD2511 and TR/XR2503 the new Service Code is 9352 671
01112
(7600, micro-P). Until the new code is available the current code (9352 653 70112) is shipped.
For 13PT30 use 9352 641 28112 as 7600 (no change).
For 20PT30 use 9352 653 73112 (no change).
No. 8 ****************************
Manual Number: 7584
OPTIONS FOR 13PT30
INFORMATION: The Option Bytes for the 13PT30 (EME810)
are 230 255 135 229 058 134 216
No. 9 ****************************
Manual Number: 7584
OSD SWITCHES FROM STEREO TO MONO
SYMPTOM: The on-screen display will switch to monaural
on a stereo signal.
CURE: Replace capacitor 2003 with 470uf, 16 volt lytic,
Service Code 4835 124 47043.
2003 is at E6 coordinates in the E8 chassis and at E7 in the F8
chassis.
No. 10 ****************************
Manual Number: 7584
SAVE SERVICE MODE CHANGES
INFORMATION: When making adjustments or changes in SAM remember to
always use the MENU command to return to the TOP MENU. The TOP MENU is
Advertisement
