Advertisement
Explanation of top level SAM menu display:
The Software Identification, Cluster, and Version are explained in the Service Default Mode
section under "Explanation of Display."
The Menu Items and Sub Menus are explained below.
Note: The "Audio" sub menu will not be seen on screen when Service Alignment Mode is
first entered. Use the Menu Up and Menu Down buttons on the remote control to view
all menu items and sub menu choices.
5. To select a menu item or a sub menu in SAM, use the Menu Up or Menu Down keys on the remote
control to highlight the item or menu you wish to adjust.
6. To change the value of a highlighted SAM menu item (AKB or VSD), use the Menu Left or Menu
Right keys on the remote control.
7. To enter a highlighted SAM sub menu, use the Menu Left or Menu Right keys.
After entering the sub menu, use the Menu Up or Menu Down to select an item within the sub menu.
Use the Menu Left or Menu Right keys to change the value of the selected item.
Press the Menu button to return to the top level SAM menu.
8. Press the Menu button on the remote control while in SAM to switch the software to a Virtual
Customer Mode; the text "SAM" will still be displayed in the upper right corner of the screen. In this
mode, all customer menu adjustments to the set can be made. From the Virtual Customer Mode,
press the Menu button to return to the SAM Menu.
9. Press the Status button on the remote control to toggle the OSD (except "SAM") ON and OFF.
10. To exit the Service Alignment Mode, turn the set off with the Power button on the remote control. To
turn off the set without exiting SAM (or erasing any stored error codes), unplug the ac cord. When the
set is powered on again, the Service Alignment Mode will still be active.
Note: When SAM is exited or a power interrupt occurs, the volatile SAM items AKB, VSD, AFW, and
SBL will be reset to their original values.
Main Menu
The SAM main menu contains the following items:
− AKB
− VSD
− Tuner sub menu
− White Tone sub menu
− Geometry sub menu
− Audio sub menu (on stereo chassis)
Menu: MAIN
AKB
Black current loop
(Auto Kine Bias)
VSD
Vertical scan
disable
TUNER
WHITE TONE
GEOMETRY
AUDIO
Values
Remarks
OFF/ON (0/1)
OFF/ON (0/1)
>
>
>
Available only on stereo chassis
>
Advertisement
