Transport - Nokia Flexi Zone Pico Product Description

Flexi Zone Indoor Pico BTS Product Description

9 Transport

Issue: 01
Transport protocol
Flexi Zone Pico Indoor BTS uses IP/Ethernet as a standard transport protocol. A copper
or wireline Ethernet is the standard interface in BTS units.
When external transport solutions (such as wireless backhaul, GPON, etc.) are used,
they communicate through the Ethernet connection on the BTS and the technology used
is transparent to the BTS.
Flexi Zone Pico Indoor versions supports the following network interfaces depending on
the technology:
LTE
•
eNodeB to MME and Serving SAE Gateway with S1 interface
–
eNodeB to eNodeB with X2 interface
–
WCDMA
•
IUB (100/1000 BASE-T)
–
RJ45 (the physical transport interface configuration)
–
The physical transport interface configuration available is RJ45.
Wireline Ethernet
Flexi Zone Pico Indoor BTS Base Module RJ45 socket supports 2 Gigabit Ethernet
copper interfaces 100/1000 Base-T according IEEE802.3 clause 40.
DN09210454
Transport
31