Reset Button; Poe-++ Solution; Table 4 Poe-++ Specification - Nokia Flexi Zone Pico Product Description

Construction

5.2 Reset button

5.3 PoE-++ solution

12
Table 3 Interfaces description (Cont.)
Interface
BH #2/LMT Management port
5V DC port
GPS antenna port
ANT1 and ANT2 antenna ports SMA
The reset button is placed on the connection panel of the Flexi Zone Indoor Pico module.
There are two functions of the reset button:
A momentary push of the button will result in a hard reset of the device (similar to
•
power up restart)
Pressing and holding the button for more than 5 seconds will trigger the in factory
•
default reset
Flexi Zone Indoor Pico modules support Power-over-Ethernet Evolution (PoE++)
technology to supply the unit with power. The PoE solution allows electrical power to
pass along with data on Ethernet cabling. It offers several benefits to the user, including:
Cost savings - PoE-++ significantly reduces the number of electrical wiring and
•
outlets that have to be installed inside the building
Easy installation - there is no need to search for a secure place to mount the
•
AC/DC adapter on a wall or a ceiling
Flexibility - it is easy to relocate the Pico module in order to find an optimal RF and
•
WiFi reception
The PoE++ parameters are listed in the table Table 4: PoE-++ specification.
Table 4 PoE-++ specification
Parameter
Power sourcing equipment (PSE)
power
Power at powered device (PD)
*
Voltage range at PSE
Flexi Zone Indoor Pico BTS Product Description
Connector type
RJ45
3.5 mm barrel connector
SMA
Value(s)
* 60 W
output
* 51 W
50 - 57 VDC
DN09210454
Description
Ethernet connection with the
core network or Pico Module
management
DC in power supply
GPS antenna signal receive
External antennas
(LTE/WCDMA) signal transmit
and receive
Issue: 01