Page 1
Adjustable High Chair Model Numbers: 79261, 79372, 79373 Adult assembly is required. Please keep these instructions for future reference. Tool needed for assembly: Phillips Screwdriver.
Page 3
Right Leg Front Brace Top Slot • Fit the front brace into the right leg (labeled "R"). • Turn the assembly so that the Fisher-Price ® logo on the front • Insert two 1 " screws into the right leg and tighten with a brace faces away from you.
Page 4
Assembly Retainers Support Tube Seat Back • Fit the retainers over the support tube and onto the seat • Position the Adjustable High Chair seating side down. bottom pegs. • Rotate the leg assembly toward the seat back. • Insert two "...
Page 5
Assembly Lower Seat Pad Fastener Straps Retainers Footrest Support • Position the Adjustable High Chair seating side down. • Rotate the footrest support toward the seat bottom. Fasteners • Insert one side of the footrest support into a retainer. • Insert the other side of the footrest support into the other retainer.
Operation and Use Footrest Adjustment Seat Height Adjustment IMPORTANT! Do not adjust the seat height with your child in the Adjustable High Chair. Seat Handle Upper Position Lower Position • The footrest can be adjusted to an upper or lower position. To adjust height: Footrest Support...
Page 7
Operation and Use Restraint Belts Tray Use WARNING WARNING Your child should be secured in the high The tray is not designed to hold your chair at all times by the restraint belts. child in the high chair. The restraint belts must be adjusted to fit your child snugly.
Page 8
If you have any questions about this product: In Canada, call 1-800-567-7724, or write to: Mattel/Fisher-Price, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. In Great Britain, telephone 01734 770488. In Australia, call the Fisher-Price Australian Consumer Advisory Service toll-free at 1-800-800-812, or write to:...