Dimplex OPTIFLAME BF Series Parts & Service Manual page 4

OPTIFLAME ELECTRIC FIREPLACE
OPERATION
FIGURE 2
FIGURE 3
FIGURE 3
Level 1: The flame effect is turned on and the
first red indicator light is activated.
Level 2: The flame effect remains on, the
heater is activated to the low heat setting, and
the first and second red indicator lights are
activated.
Level 3: The flame effect remains on, the
heater is set to the high heat setting, and all
three red indicator lights are activated.
MANUAL CONTROLS
The fireplace can also be controlled in a similar
manner to the remote control with switches
located on the fireplace (FIGURE3).
A. Main Power Switch
ALL MODELS WITH REMOTE CONTROL.
Main on/off switch, supplies power to the
remote control receiving unit. When placed in
the on position level 1 indicator will flash.
ALL MODELS WITHOUT REMOTE
CONTROL.
Main on/off switch, activates the flame effect.
B. Heater Control Switch
ALL MODELS WITH REMOTE CONTROL.
Operates fireplace in the same manner as the
remote control transmitter. Pressing the left
side of this switch has the same effect as the
ON button on the remote control and the right
side has the same effect as the OFF button of
the remote control. Pressing once to the left
activates Level 1, twice activates Level 2,
three times activates Level 3. Pressing to the
right turns the fireplace off.
ALL MODELS WITHOUT REMOTE
CONTROL.
Heater ON/OFF switch, activates heater to
high level.
4