Connecting I/Os Of The Tb30 - Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual

Connecting
4.6 Connecting I/Os
Note
With a CX32‑2, the shield is connected in the same way as the D4x5‑2. A CX32‑2 only has
the X122 terminal block and the shield connection element is narrower on a CX32‑2 than on
a D4x5‑2.
4.6.2

Connecting I/Os of the TB30

Pin assignment
Figure 4-9
Additional references
Detailed information about the pin assignment of the X424, X481 and X482 interfaces can be
found in the
74
Interface arrangement on the TB30
SIMOTION D4x5‑2 Manual, Section "Supplementary system components".
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
SIMOTION D4x5-2