Handling The Remote Controller; Installing Remote Control Holder; Inserting And Replacing Batteries; Battery Notes - Midea MSOPBU-09HRFN8-QRE6GW User Manual

HANDLING THE REMOTE CONTROLLER

NOT SURE WHAT A FUNCTION DOES?
Refer to the and How to Use Basic Functions and How to Use
Advanced Functions sections of this manual for a detailed
description of how to use your air conditioner.
SPECIAL NOTE
• Button designs on your unit may differ slightly from the example
shown.
• If the indoor unit does not have a particular function, pressing
that function s button on the remote control will have no effect.

INSTALLING REMOTE CONTROL HOLDER

The remote controller can be attached to a wall or stand by using a
remote controller holder.
1. Before installing the remote controller, check that the air
conditioner receives the signals properly.
2. Install the holder with two screws.
3. Put the remote controller in the holder.

INSERTING AND REPLACING BATTERIES

Your air conditioning unit comes with two AAA batteries. Put the
batteries in the remote control before use:
1. Remove the back cover from the remote control, exposing the
battery compartment.
2. Insert the batteries, paying attention to match up the (+) and
(-) ends of the batteries with the symbols inside the battery
compartment.
3. Install the back cover on.

BATTERY NOTES

For optimum product performance:
• Do not mix old and new batteries, or batteries of different types.
• Do not leave batteries in the remote control if you don't plan on
using the device for more than 2 months.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted municipal waste. Refer to
local laws for proper disposal of batteries.
Put the
remote
controller
in the
holder.
9