Function Buttons - Midea MSOPBU-09HRFN8-QRE6GW User Manual

FUNCTION BUTTONS

Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use The Basic/Advance Functions section of this
manual.
Tryck på knappen för att starta eller
stänga avenheten.
Scrolls through operation modes as
AUTO  COOL  DRY  HEAT  FAN
Starts and stops energy efficient feature.
If hold down this button for more than
2 seconds, the sleep feature is activated.
TIMER/SLEEP
Sets timer to turn unit on and off (see for
instructions) How to Use Basic Functions.
Turns indoor units LED display on and off.
FOLLOW ME
Press the button to activate/deactivate
FollowMe function or to display the room
Enables unit to reach preset temperature
in shortest possible time.
8
ON/OFF
MODE
follows:
ECO/SLEEP
LED
temperature.
TURBO
Detects the people activities
INTELLIGENT EYE
in the room.
FAN (FLÄKT)
Selects fan speeds in the following
order:
AU%  20%  40% 
60%  80%  F% (100%).
Press the Adjust + or - button to
increase/decrease the fan speed in
1% increments.
TEMP+
Increases temperature in 0.5°C (1°F)
increments. Hold down this button
to increase temperature in 1°C (1°F)
increments. Max. Temperature is
30°C (86°F).
TEMP-
Decreases temperature in 0.5°C (1°F)
increments. Hold down this button to
decrease temperature in 1°C (1°F)
increments. Min. temperature is
16°C (60°F).
SWING
Starts and stops horizontal louver
movement.
SWING
Starts and stops vertical louver
movement.
SELF CLEAN
Starts and stops the unit self clean
feature.