Delta 300 T3 A Series Installation Instructions Manual
Delta 300 T3 A Series Installation Instructions Manual

Delta 300 T3 A Series Installation Instructions Manual

Advertisement

Quick Links

NOTE: Control Box #0 and #1 are designed for routine 171°F (77°C)
disinfection cycles up to 30 minutes.
Control Box #8 is not recommended for high temperature disinfection
cycles as the thermostatic mixing valve limits the higher temperature
flow output.
NOTE: For optimum performance of this product, we recommend
a system pressure between 20 and 80 PSI static. This product
will operate up to a maximum of 125 PSI static per ANSI and CSA
requirements. However, we do not recommend pressure above
80 PSI. Thermal expansion or leaking pressure reducing valves
may require use of expansion tanks or relief valves to ensure
your system never exceeds its maximum intended pressure
setting.
1.5 USGPM (5.7 L/min)
063181A (R3)
063183A (R5)
063184A (R7)
063185A (R35)
0.5 USGPM (1.9 L/min)
063186A (R3)
063188A (R5)
063189A (R7)
063190A (R35)
Single-Hole Mount
Assembly including
Sensor and Hold-Down
Package and Spout
(with smooth ends)
060564A
Single Hole Deck Gasket (6/pkg)
060546A
4" Deck Plate & Hold-Down Package
060547A
8" Deck Plate & Hold-Down Package
063254A
Deck Plate Nut & Washers
060905A
Cover Gasket
060906A
Surface
Mount Housing
060989A
Controller
063128A
Battery Box Assembly less driver
board and battery holder
*Package Quantities May Change.
Check the Parts section of the latest Delta Commercial Faucet Price List for current quantities.
PLEASE LEAVE this M&I Sheet with the owner, maintenance plumber, etc. as
items relating to ongoing maintenance suggestions and procedures are included.
Outlet #7
Outlet #8
Note: See page 3 for parts breakdown
OR
on recessed & surface mount boxes.
063127A
Solenoid Valve with 3/8"
Compression Connectors
060908A
Solenoid Holder
060909A
Screen Assembly
063131A
3/8" Comp Connect Nut
and Ferrile
w w w . s p e c s e l e c t . c o m
300__T3__ __ __A
Write purchase model number here for future reference
061292A
3000T adaptor cable
*must order with spout RP
063139A
RP6087
0.5 USGPM
Nut & Washer
(1.9 L/min)
063140A
1.5 USGPM
(5.7 L/min)
Adapter with Flow
Control for smooth
end spouts
061256A
36" Cable
060683A
Extension
24VAC to 6VDC
Converter
RP30523
Braided Hose
Page 1
060637A
1.5 GPM (5.7 L/min)
VR Laminar Outlet with Agion
060639A
1.5 GPM (5.7 L/min)
VR Flow Control Aerator & Wrench
063191A (R3)
063193A (R5)
063194A (R7)
063195A (R35)
Single-Hole Mount
Assembly including
Sensor and Hold-Down
Package and Spout
with aerator thread
060564A
Single Hole Deck
Gasket (6/pkg)
OPTION LIST
060681A
Battery Holder
TRANSFORMERS
060704A
Transformer 110 to 24 VAC 20VA
up to 5 Electronic Valves
060771A
Transformer 110 to 24 VAC 40VA
up to 10 Electronic Valves
DECK PLATES
060546A
4" Deck Plate & Hold-Down Pkg
060547A
8" Deck Plate & Hold-Down Pkg
Fig. 1
®
Antimicrobial
209491 Rev. B

Advertisement

Table of Contents
loading

Summary of Contents for Delta 300 T3 A Series

  • Page 1 Ferrile *Package Quantities May Change. Check the Parts section of the latest Delta Commercial Faucet Price List for current quantities. PLEASE LEAVE this M&I Sheet with the owner, maintenance plumber, etc. as items relating to ongoing maintenance suggestions and procedures are included.
  • Page 2: Installation And Set Up Instructions

    Installation should be in accordance with local plumbing and electrical codes. FLUSH ALL PIPES THOROUGHLY BEFORE INSTALLATION. INSTALLATION AND SET UP INSTRUCTIONS FOR SURFACE MOUNT HOUSING: CONTROL BOX #0 Fig. 2 STEP 1. FAUCET INSTALLATION Connect 20” braided hose to spout inlet. Clean deck/sink surface where faucet will be mounted. Mount faucet to sink using nut(s) and washer(s) provided.
  • Page 3: Step 2. Faucet Installation

    Installation should be in accordance with local plumbing and electrical codes. FLUSH ALL PIPES THOROUGHLY BEFORE INSTALLATION. INSTALLATION AND SET UP INSTRUCTIONS FOR RECESS MOUNT HOUSING: CONTROL BOXES #1 & 8 STEP 1. ROUGH IN Note: Wires connecting between box(es) and from transformer must be protected from abrasion, and being pulled at connections. They also may have to be fished through at a later stage of construction.
  • Page 4 INSTALLATION AND SET UP INSTRUCTIONS FOR RECESS MOUNT HOUSING: CONTROL Fig. 8 Typical Installation BOXES #1 & 8 (Recessed Mount Box) Gooseneck Spout STEP 3. CONNECT WATER SUPPLY Install sink and connect drainage to rough in. See applicable Fig. 6 or Fig.
  • Page 5: Step 8. Making Adjustments

    INSTALLATION AND SET UP INSTRUCTIONS FOR RECESS MOUNT HOUSING: CONTROL BOXES #1 & 8 Operation Illustration STEP 7. TEST FOR OPERATION Test for operation. If unit does not work properly, see Troubleshooting Guide on page 7. STEP 8. MAKING ADJUSTMENTS If adjustments are required.
  • Page 6: Battery Strength Indicator

    STEP 9. SETTING THE CONTROLLER (If adjustments are required. Note factory defaults for program shown in Quick Reference Chart.) Press the Enter/Exit button on the controller to turn on the LCD screen. The first screen you will see is the visual battery strength indicator (Fig.
  • Page 7: Care Instructions

    CARE INSTRUCTIONS This Delta Commercial faucet is designed and engineered in accordance with the highest quality and performance standards. With proper care, it will give years of trouble free service. Care should be given to the cleaning of this product. Although the chrome finish is extremely durable, it can be DAMAGED by ACIDIC CLEANERS (i.e.
  • Page 8 Delta Commercial Faucet Limited Warranty All parts of the Delta® HDF® and TECK® faucets are warranted to the original consumer purchaser to be free from defects in material, finish and workmanship for a period of five (5) years unless otherwise specifically stated in the catalogue and price book. This warranty is made to the original consumer purchaser and shall be effective from date of purchase as shown on purchaser’s receipt.

This manual is also suitable for:

209491

Table of Contents