Download Print this page

Delta OLMSTED 35717-DST Manual

Two handle widespread lavatory faucets

Advertisement

Quick Links

ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
ICC/ANSI A117.1
Model/Modelo/Modèle
35717-DST
Series/Series/Seria
TM
OLMSTED
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
For easy installation of your Delta
faucet you will need:
To READ ALL the instructions completely
before beginning.
To READ ALL warnings, care, and
maintenance information.
Para instalación fácil de su llave
Delta usted necesitará:
LEER TODAS las instrucciones
completamente antes de empezar.
LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet Delta
facilement, vous devez:
LIRE TOUTES les instructions avant
de débuter;
LIRE TOUS les avertissements ainsi
que toutes les instructions de nettoyage
et d'entretien;
www.deltafaucet.com
68839
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
68839
1
TWO HANDLE WIDESPREAD
LAVATORY FAUCETS
LLAVES DE LAVAMANOS
EXTENDIDAS DE DOS MANIJAS
ROBINETS À ENTRAXE LONG À
DEUX POIGNÉES POUR LAVABO
3/32" (2.38mm)
3/32 po
3/32" (2.38mm)
3/32 po
9/12/12
Rev. A

Advertisement

loading

Summary of Contents for Delta OLMSTED 35717-DST

  • Page 1 Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/ Articles dont vous pouvez avoir besoin: 3/32” (2.38mm) 3/32 po For easy installation of your Delta faucet you will need: To READ ALL the instructions completely before beginning. To READ ALL warnings, care, and maintenance information.
  • Page 2 Si la reparación o su reemplazo no es práctico, Delta Faucet Company tiene DELTA FAUCET COMPANY NO SE HACE RESPONSABLE POR CUALQUIER DAÑO ESPECIAL, la opción de reembolsarle su dinero por la cantidad del precio de compra a cambio de la devolución...
  • Page 3 RP74423 Lift Rod Barra de Alzar Tige de Manoeuvre RP72131 Decorative Supply Line Covers (PVC) RP60352 Quantity 2, 30" Long Bonnet Nuts (2) Available as Accessory Order (Not Included) Bonetes/Capuchones (2) Tapas Decorativas para las Líneas de Suministro (PVC) Chapeaux Filetés (2) Cantidad 2, 30"...
  • Page 4 Delta is not responsible for tubing that is cut too short or cut in a way that valves may be rotated to align handles and stops before tightening nuts.
  • Page 5: Standard Connections

    à son axe : Faites une nouvelle coupe en prenant couper le tube de manière à obtenir un joint étanche. Delta raccords de robinetterie (1) 3/8 po à garde de ne pas trop raccourcir le tube.
  • Page 6 Custom Fit Connections - Plastic Sleeve (Ferrule) Installation Instructions Conexiones Especiales - Instrucciones para la Instalación del la Manga Plástico (Casquillo) Branchements Spéciaux - Instructions d’installations de le manchon en plastique (Bague) Correct method Incorrect Installation Método Correcto Instalación Incorrecta Bonne méthode Installation Incorrecte Do not install plastic sleeve...
  • Page 7 Pop-Up Installation Remove stopper (1) and flange (2). Screw nut (3) all the way down. Apply silicone to underside of flange (1). Insert body (2) into sink. Push black gasket (4) down. Screw flange onto body. Pivot hole (3) must face back of sink. Tighten nut/gasket, clean excess silicone.
  • Page 8 To Change the Position of Handle Stop (5). Para cambiar la posición de el tope (5). Pour changer la position de la butée (5). Cold Fría Caliente Froide Chaude hacia el surtidor en lados Arrow faces calientes y fríos. spout on both hot &...