Freeze Frame (Data) - Bosch OBD 100 Original Instructions Manual

Eobd & can scan tool
Table of Contents

Advertisement

en
12 | OBD 100 | Operation
5.8

Freeze frame (data)

This provides an image of the operating and
ambient conditions at the moment in time at
which the trouble code was first generated.
Freeze frames are not stored and displayed for
all PIDs. A list of the PID numbers (parameter
IDs) supported by the OBD 100 is given in
Section 9.
1. Switch on the ignition (position 2).
2. Connect the OBD 100 to the vehicle
 Data are read in.
3. In the main menu select "5) Freeze Frame" with
READ or ERASE and confirm with E.
 Trouble codes are displayed
4. Select the trouble code and confirm with E.
"
Freeze frame data are displayed.
i
Scroll through the corresponding freeze
frame data using READ or ERASE.
5.9
VIN (vehicle identification
number)
i
The VIN function is not supported by all
vehicles.
1. Switch on the ignition (position 2).
2. Connect the OBD 100 to the vehicle.
 Data is read.
3. In the main menu select "6) VIN" with
READ or ERASE and confirm with E.
"
The vehicle identification number appears as a
moving message.
|
569624 Rev "A"
2013-12-19
5.10
Faults
Fault
Remedy
LINK ERROR
During reading
Turn the ignition key to the OFF
position for 10 seconds; then
return to the ON position and
press the <READ> button.
Make sure the ignition key is set
to ON (position 2) and not to
ACCESSORIES (position 1).
During erasing
Turn the ignition key to the
OFF position for 10 seconds;
then return to the ON position
and press one of the following
buttons with the ignition key set
to ON (position 2) and not to
ACCESSORIES (position 1):
R Continue erasing operation
with ERASE.
R Cancel erasing operation with
READ (read codes again) or
E (return to main menu).
A trouble code will appear again if
the cause of the problem has not
yet been rectified.
MIL status
If the MIL status is
warning light does not come on
with the engine running, there
is a problem in the circuit of
the malfunction indicator light.
It is then advisable to consult a
workshop.
Tab. 11: Faults
ON
and the
Robert Bosch GmbH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents