To Change The Machine Base - Janome MyLock 744 Servicing Manual

To remove:
1. Remove set screws A, B and four hinge screws C and remove four base cushions D and
washers.
2. Remove the machine base unit.
To attach:
3. Attach the machine base and the four base cushions D, washers, and tighten hinge screws C.
4. Tighten setscrews A and B.
Base cushion D
Washer
Hinge screw C

TO CHANGE THE MACHINE BASE

Washer
Setscrew A
Setscrew B
6