Timex Ironman Transit+ User Manual page 7

Press button B to start or stop the Chronograph. Press button D while chronograph is running to take "Lap" time
measurement. "Lap" time view will be released in 5 sec automatically.
Press and hold button D while chronograph is stopped to clear the chronograph.
LOOP TIMER MODE:
Press button C until the mode prompt shows "TIMR". The watch will enter the Loop Count Down Timer display
with segment (SG-1 .. SG-6) displayed on the left upper row. The loop counter is displayed at the right upper
row. The Count Down Time is displayed at the lower row.
Press button D to select the segment from SG-1 to SG-6.
Press button B to start or stop the timer operation.
Press and hold button D while timer is stopped to clear all count down time and reload the preset times again.
In Timer mode, press and hold button C to enter the Loop Timer Setting mode. Press button C to select the data
for setting. Press button B or D to change the selected setting digits. The setting sequence is Timer Segment
No, Timer Second, Timer Minute, Timer Hour.
Press and hold button C again to exit the setting mode.
The timer alert beep sound will be generated when each timer counts down to zero. Next segment of the timer
will be loaded and start to count down automatically. The number of loops is 20. Timer will stop automatically.
6