Installing The Ts Adapter Unit - Siemens SIMATIC S7 System Manual

96BInstallation
3.3 Installation and removal procedures
Table 3- 15 Installing the SIM card
Procedure
Use a sharp object to press
the eject button of the SIM
card tray (in the direction of
the arrow) and remove the
SIM card tray.
Place the SIM card in the SIM
card tray as shown and put
the SIM card tray back into its
slot.
Note
Ensure that the SIM card tray is correctly oriented in the card tray. Otherwise, the SIM card
will not make connection with the module, and the eject button may not remove the card tray.
3.3.8.3

Installing the TS adapter unit

Prerequisites: You must have connected the TS Adapter and a TS module together, and the
DIN rail must have been installed.
Note
If you install the TS unit vertically or in high-vibration environment, the TS module can
become disconnected from the TS Adapter. Use an end bracket 8WA1 808 on the DIN rail to
ensure that the modules remain connected.
54
Task
1
①
②
③
2
3
S7-1200 Programmable controller
System Manual, 11/2011, A5E02486680-05
TS Module GSM
SIM card
SIM card tray