Installing The Sim Card - Siemens SIMATIC S7 System Manual

CAUTION
The TS module can be damaged if you touch the contacts of the plug connector
TS module. Follow ESD guidelines in order to avoid damaging the TS module through
electrostatic discharge. Before connecting a TS module and TS Adapter, make sure that
both are in an idle state.
1
①
②
③
CAUTION
Before connecting a TS module and TS adapter basic unit, ensure that the contact pins
are not bent. When connecting, ensure that the male connector and guide elements are
positioned correctly.
Only connect a TS module into the TS adapter. Do not force a connection of the TS adapter
to a different device, such as an S7-1200 CPU. Do not change the mechanical construction
of the connector, and do not remove or damage the guide elements.
3.3.8.2

Installing the SIM card

Locate the SIM card slot on the underside of the TS module GSM.
NOTICE
The SIM card may only be removed or inserted if the TS module GSM is de-energized.
S7-1200 Programmable controller
System Manual, 11/2011, A5E02486680-05
2
3
4
3
6
TS module
TS Adapter
Elements
3.3 Installation and removal procedures
5
④
Plug connector from the TS module
⑤
Cannot be opened
⑥
Ethernet port
96BInstallation
④
of the
④
53