Custom Audio Electronics VKP80III User Manual page 74

PAPER RETRACTING
PRINT WIDTH
PAPER THRESHOLD
PAPEREND BUFFER CLEAR Cleaning mode of the data in receive buffer, if the printing is stopped due to lack of paper:
PRINTHEAD TEST
POWERON
DATA LOGGER
74
Setting of the "retract" function of the paper, with paper presence on ejector during
power-up:
Disabled D = "retract" function disabled
Enabled = "retract" function enabled
The parameter is printed only with VKP80II emulation enabled.
Width of printing area:
48 mm 58 mm
50 mm 60 mm
52 mm 62 mm
54 mm 64 mm
56 mm 66 mm
The parameter is printed only with VKP80III emulation enabled. With VKP80II emulation
enabled, the printing width is ixed to 76 mm.
Threshold value (in percent) for the recognition of the presence of paper by the paper
presence sensor:
30% 70%
40% D 80%
50% 90%
60%
Disabled D = the data remain in the receive buffer. When the paper runs out, the device
keeps the remaining data in the receive buffer and prints the remaining
portion of the ticket after that the new paper is loaded.
Enabled = when the paper runs out, all data in the receive buffer are deleted.
Setting of the performing of the print head test:
D
Disabled = the test is performed only during the printing of the setup report
Enabled = the test is performed at each power on
Setting of the data logger function on the "LOG" folder on the lash memory:
Disabled D = data logger function disabled
Text = the printed text is stored in .txt ile
Graphic = the printed graphic is stored in .bmp ile
Text + Graphic = both text and graphic are stored in .txt and .bmp iles
The parameter is printed only with VKP80III emulation enabled.
The name of the irst text ile stored will be "00000001.txt"; the name of the irst graphic
ile stored will be "00000001.bmp"; the ile number is incremented automatically, when
there is no more space, the oldest iles are deleted.
68 mm 78 mm
70 mm 80 mm
72 mm
74 mm
D
76 mm