Greenheck APEX-200 Assembly Instructions page 2

STEP 2: Assemble Duct Adapters
Hardware Required:
Instructions:
9
8
Figure 1:
Exhaust Duct Adapter Assembly
STEP 3: Assemble Supply End Section
Hardware Required:
Instructions:
Figure 5
End and side
channels fasten
together as shown.
2
(16) Screws, SMS (A) 12 x 0.625 (IHH)
(4) Adapter Side Channel
(3) Adapter End Channel
(1) Center Channel
• See Figures 1 & 2 for positioning the Adapter Side and End Channels.
• Align the holes and fasten as shown.
8
(12) 3 ⁄ -16 x 3 ⁄ Serrated Flange Bolts
8 4
(12) ⁄ -16 x ⁄ Serrated Flange Nuts
3 3
8 4
(4) Screw, SMS (A) 12 x 0.625 (IHH)
(1) End Channel
(2) Supply End Outer Channel
(2) Supply End Inner Channel
(1) Supply Duct Adapter Assembly (See Step 2)
• Position Channels as shown in Figure 3.
• Align the holes and fasten as illustrated below.
3
2
1
Figure 3:
Supply End Section
9
8
9
Supply Duct Adapter
3
Figure 2:
Supply Duct Adapter Assembly
Figure 4
Side and center
2
channels fasten
together as shown.
7
9