Husqvarna 522HD60X Workshop Manual page 28

5. Remove the screws and cable (B). Pull up the
ignition module and spark plug cable.
6. Replace the ignition module.
28 - Repair instructions
7.7.8 To install the ignition module
1. Attach cable (A) to the ignition module. Put the
module in the crankcase. Attach the 2 screws and
B
cable (B). Do not tighten the screws.
A
2. Put in the air gap gauge. Refer to
page 13 .
B
A
Servicing tools on
1012 - 002 -