WEIDER CLUB C670 User Manual page 17

34. Locate the Butterfly Cable (109). Attach the
Cable to the Left Butterfly Arm (57) with an M8 x
43mm Shoulder Bolt (107), an M10 Small Washer
(95), and an M8 Nylon Locknut (108).
35. Wrap the Butterfly Cable (109) over a "V"-pulley
(86). Attach the "V"-pulley and a Large Cable
Trap (111) to the bracket on the Center Upright
(45) with an M10 x 60mm Bolt (105) and an M10
Nylon Locknut (34). Make sure the Cable Trap
is oriented to hold the Cable in the groove of
the Pulley.
36. Wrap the Butterfly Cable (109) under a Pulley
(87). Attach the Pulley to the Double "U"-bracket
(81) with an M10 x 45mm Bolt (33) and an M10
Nylon Locknut (34).
37. Wrap the Butterfly Cable (109) over a "V"-pulley
(86). Attach the "V"-pulley and a Large Cable
Trap (111) to the other side of the bracket on the
Center Upright (45) with an M10 x 60mm Bolt
(105) and an M10 Nylon Locknut (34). Make sure
the Cable Trap is oriented to hold the Cable in
the groove of the Pulley.
38. Attach the Butterfly Cable (109) to the Right
Butterfly Arm (56) with an M8 x 43mm Shoulder
Bolt (107), an M10 Small Washer (95), and an M8
Nylon Locknut (108).
34
35
45
36
37
111
105
109
38
56
17
107
109
95
108
57
34
86
111
105
109
109
87
34
33
81
86
45
34
107
109
95
108