Safety Advice; Workplace Safety; Electrical Safety - Parkside PLBS 30 A1 Operation And Safety Notes

Safety advice

Safety advice
Q
C AUTION! Failure to observe the instructions and
advice given below may result in electric shock, fire
and / or serious injury.
1.

Workplace safety

a) Keep your working area clean and well lit. Untidy or
poorly lit working areas can lead to accidents.
b) Do not work with the device in potentially explosive
environments in which there are inflammable liquids,
gases or dusts. Electrical power tools create sparks, which can
ignite dusts or fumes.
c) K eep children and other people away while you are
operating the electrical tool. Distractions can cause you to
lose control of the device.
2.

Electrical safety

To avoid danger to life from electric shock:
a) The mains plug on the device must match the mains sock-
et. The plug must not be modified in any way. Do not
use an adapter plug with devices fitted with a protec-
tive earth. Unmodified plugs and matching sockets reduce the
risk of electric shock.
b) Keep the device away from rain or moisture. Water en-
tering an electrical device increases the risk of electric shock.
56 GB/MT