Carton Contents - Intex Giraffe Operation Manual

UNPACKING
Carefully remove the tool and all loose items from the shipping container.
Retain all packing materials until after you have inspected and satisfactorily operated the machine.

CARTON CONTENTS

AG700/AG799 - Intex Giraffe
AG001 - Intex Giraffe
AG066B - Intex Giraffe
AGHKEY6 - Intex Giraffe
MANAG700 - Intex Giraffe
DO NOT OPERATE THIS TOOL UNTIL YOU READ AND UNDERSTAND
THE ENTIRE INSTRUCTION MANUAL
TO REPLACE SUPER PAD ABRASIVE
1. Unplug the machine.
2. Peel away the worn out sandpaper disc, leaving the sponge backing pad in place.
3. Carefully center the new sandpaper disc and press into place. It will be held securely by the
hook and loop backing.
Jost
®
®
Super Pads
For excellent finish, we recommend the German made range of Intex Useit
TO REPLACE CUSHIONED INTERFACE PAD
The sponge pad must be perfectly flat to get good sanding results. If it is deformed or damaged it will
cause very uneven sanding. Always replace it when damaged. It is hook and loop on both sides, so to
Replace it, peel it away from the hook and loop on the Sanding Plate Base and affix a new one.
BRUSH BRISTLES ON THE EDGE OF THE SANDING PLATE COVER
The brush bristles on the edge of the Sanding Plate Cover serve two purposes, they keep the sanding disc
properly aligned with the work surface without gouging and they also help the efficiency of the dust
collection by the vacuum cleaner. These brush bristles will wear with continued use. The Sanding
Plate Cover should be replaced when the bristles are too worn to ensure effective dust collection and
stabilization of the sanding head.
TO REPLACE SANDING PLATE COVER
1. Hold the sanding plate in one hand and with the other, using the L-hex wrench
(supplied), first break free the center bolt clockwise (1/8 turn only!). Then only use
the L-hex wrench to hold the center bolt from turning and spin off the sanding plate
counterclockwise.
Dustless Sander
®
H/D Vacuum Hose - 4.3m
®
Cushioned Interface Pad
®
L-Hex 6mm Wrench Tool
®
Instruction Manual
®
®
Dust Extractors
WARNING: To reduce the risk of injury, user must read and understand operator's manual.
Super Pads.
®
7