Table of Contents
Advertisement
Instructions for Mobile Phone APP
After successfully installing the PXE-R600APP
on the mobile phone, start the PXE-R600 device.
Open your mobile phone, go to "Settings" → "Enable
Bluetooth" → "Search Device" → "DSP-HD-...", Click
to connect, or directly open PXE-R600APP to search
Bluetooth automatically, and click to connect "DSP-
HD-...". It will indicate that the connection is successful
when showing 100% data synchronization.
Read the Disclaimer carefully and click
"Accept" to enter the homepage interface.
Interface Introduction
There are five interfaces of different functions,
delay, channel, homepage, EQ and frequency
combination. Enter the homepage interface by
default.
Homepage Interface
4
Device Connection
The Bluetooth icon shows red [ ] indicateing that
the Bluetooth of the mobile phone is disconnected; The
Bluetooth icon shows green [ ] indicateing that the
Bluetooth of the mobile phone is connected.
Menu Bar Introduction
Click the menu bar [
to enter "Encryption", "Shutdown Delay", "Share Sound
Effect", "Save Sound Effect", "Local Sound Effect" and
"About" to operate.
1.
Select "Encryption" and enter a 6 digit encryption
password to encrypt the tuned sound effect data.
The encrypted data can be decrypted by clicking
"Decrypt" and entering the correct password. Click
"Clear Data" on the decryption interface to decrypt
bu one key and restore the data to ex-factory state.
2.
Select "Shutdown Delay" to set shutdown delay:
0~255 seconds.
3.
Select "Share Sound Effect", and you can share
a single set only or all sound effect.
4.
Select "Save Sound Effect" to enter the file
name and remarks, and you can save a single
set only or all sound effect.
5.
Select "Local Sound Effect" to call the sound
effect files saved on the mobile phone.
6.
Select "About" to view the device version.
Sound Source Selection
1.
Main sound source: Click the button below the
main sound source and select it in the pop-up
window: high level, Bluetooth or low level.
2.
Auxiliary sound source (audio mixing) :
A.
Click the button below the auxiliary sound
source, and select it in the pop-up window:
high level, Bluetooth, low level or turn off.
B.
The larger the attenuation of the main sound
source is, the lower the master volume is, with
adjustable values of 0%, 30%, 50%, 80% or 100%.
* The auxiliary sound source cannot be
superimposed with the current input sound
source, otherwise it will be invalid.
Master Volume Settings
The master volume can be adjusted by dragging
the fader or clicking the "+" or "-" buttons, with an
adjustment range of 0~35, and 27 by default. Click the
master volume speaker button [ ] to set as master
volume mute [
]. Click again to cancel the mute (it
will be unmuted automatically when tuning the master
volume).
Sound Effect Setting
There is storage space for six sets of preset sound
effect inside the device. Slide left and right to select the
preset sound effect data to save or call.
] on the upper right corner
Hide quick links:
Advertisement
Table of Contents
