Summary of Contents for Agilent Technologies 11716A
Page 1
® Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Agilent Technologies 11716A/C Interconnection Kit Operating Note Agilent Part Number: 11716-90004 Printed in USA June 2002 Supersedes: April 2002...
Page 2
The information contained in this document is subject to change without notice. Agilent Technologies makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Agilent Technologies...
THE WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL. Assistance Product maintenance agreements and other customer assistance agreements are available for Agilent Technologies products. For assistance, call your local Agilent Technologies Sales and Service Office (refer to “Support and Service”). 11716A/C Operating Note iii...
You can find a list of local service representatives on the Web at: http://www.agilent.com/find/assist Click on “Contact Us” and select your country. If you do not have access to the Internet, one of these centers can direct you to your nearest Agilent Technologies representative: United States (800) 403-0801 Canada...
Interconnection Kits. Included in the note is a list of parts with part numbers and instructions for using the kit. Description The 11716A and 11716C Interconnection Kit provides the necessary parts to connect various attenuators in series. See Table 1 for possible combinations.
Agilent Technologies Office. If the shipping container is damaged, or the cushioning material shows signs of stress, notify the carrier as well as the Agilent Technologies office. At Agilent’s option, the office will arrange for repair or replacement without waiting for claim settlement.
Page 7
Figure 1 shows how the interconnection kit is typically used. 7. When using the sheet metal base, use the .375 long screws to connect the attenuator bracket to the sheet metal base. Figure 1 Typical Installation 11716A/C Operating Note 3...