2. Wiring connection
❶ ❶
/ /
3) Pull the sensor cable into the inside of the electrical box. (The cable path differs with the size of
sewing machine.)
②
6 pin Blue
①
Inside the elec-
trical box
1) Connect sensor ❶ with sensor junction cable
.
2) Connect sensor junction cable with OP
junction cable (or or ).
[ PS-800-12080 Standard type ]
Connect sensor junction cable with the
6-pin blue connector of OP junction cable A
.
[ PS-800-8045 & -13085 Standard types ]
Connect sensor junction cable with the
6-pin blue connector of OP junction cable C
.
[ PS-800 Rotary knife type ]
Connect sensor junction cable with 6-pin
blue connector of OP junction cable D .
[ PS-800-8045 ]
① Pull two cables coming from the BK-8 control
box into the top surface of the electrical box
through the clearance provided between the
sewing machine housing and the frame.
② Pull the cables into the inside of the electrical
rack through the hole in the top surface of the
electrical rack.
– 3 –