Setting The Operation Panel - JUKI PS-800 Instruction Manual

3-3. Setting the operation panel

❶
A
B
C
D
1) Press "User param" ❶ on the menu screen of
the operation panel.
The "User param screen" is displayed.
2) Press "Statistics setting" ❷ .
The "Statistics setting screen" is displayed.
❷
3) Set items A to D as described below.
A : Operation is stopped after
B : Setting of the bobbin thread
C : Bobbin thread amount at
D : Remaining length of bobbin
Remaining length of bobbin thread at the bot-
tom marker line (mm) D is required to be cor-
rected according to the longest seam length of
the sewing pattern.
Reduce the remaining length of the bobbin
thread by 100 mm as compared with the seam
length.
– 9 –
the amount of the bobbin
thread detected by the
bobbin thread remaining
amount detection device is
lower than the bottom mark-
er line
amount for the bottom
marker line is effective
the bottom marker line
counting method
thread at the bottom marker
line (mm)
→ Yes
→ Yes
→ IN5
→ 2000