Operating Instructions; Power On/Off; Backlight Control; Data Access And Exit - UNI-T UT267B Operating Manual

V. Operating Instructions
Note:
Please carefully check if there are damaged parts or not before safe use.
Do not use the meter on dangerous sites.
Install the battery according to the manual.
Do not simultaneously press 2 buttons or more in case of invalid operation.

1. Power On/Off

Press ON to power on and LCD displays. Press OFF button to power off,
the meter will automatically power off 15 minutes later after power on.

2. Backlight Control

Press button after power on to control the backlight, which is suitable in
dark sites and at night.
3. Data Hold and Storage
Press HOLD button to maintain displayed data under measuring status,
18
indicated by HD icon, press again to cancel the operation. The meter
will automatically save and number current data while maintaining the data,
indicated by group serial number such as S 001. Max 500 sets of data is
available for the meter, displayed by FULL if the number is achieved.

4. Data Access and Exit

Press MENU to enter into data access status during measurement,
indicated by RD icon, then data lookup starts from R 001 press
Up button to increment by 1, Down button to decrement by 10 and Left
to exit this status and return to measuring mode.

5. Data Delete

Press Right button when still under data access data to enter into data
delete option, then Left or Right button to move the cursor to select
YES or NO , next MENU button for confirmation or exit, finally
returning to measuring mode.
19