Stihl FR 131 T Instruction Manual page 17

Table of Contents

Advertisement

2
4
5
7
Place the clamp (3) in the loop
N
handle (4) and position them both
against the shaft (5).
Position the clamp (6) against the
N
shaft.
Place the barrier bar (2) in position
N
as shown.
Line up the holes.
N
Insert the screws (7) in the holes
N
and screw them into the barrier bar
as far as stop.
Go to "Securing the Loop Handle".
N
Leave the barrier bar permanently
mounted to the loop handle.
FR 131 T
Mounting the Loop Handle without
Barrier Bar
7
8
3
6
7
1
Place the clamp (3) in the loop
N
handle (4) and position them both
against the shaft (5).
Position the clamp (6) against the
N
shaft.
Line up the holes.
N
Fit the washers (8) on the
N
screws (7), and insert the screws in
the holes.
Screw the square nuts (1) onto the
N
screws (7) as far as stop.
Go to "Securing the Loop Handle".
N
Securing the Loop Handle
7
8
4
N
N
3
N
5
6
1
A
4
9
10
Secure the loop handle (4)
about 20 cm/8 in (A) forward of the
control handle (9).
Line up the loop handle.
Tighten down the screws firmly –
lock the nuts if necessary.
English
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents