Table of Contents
Advertisement
2. Pick up the bottom of the stand. There are two metal tabs at the top of the VESA plate that insert into the monitor. Pull the bottom of the monitor away
from the stand, being careful not to scratch the monitor with the stand.
Attaching the Dell Soundbar
NOTICE: Do not use the soundbar power connector with any other device.
1.
Attach the Soundbar by aligning the two slots on the Soundbar with the two tabs on the bottom of the monitor.
2.
Slide the Soundbar to the left until it snaps in to place.
3. Plug in the power cord from the Soundbar in to the connector on the back of the monitor.
4.
Insert the green stereo plug from the Soundbar in to your computer's audio output connector.
NOTE: Soundbar Power Connector +12V DC output is for optional only.
NOTICE: Do not use with any device other than Dell Soundbar .
Advertisement
Table of Contents
