Setting Up The Monitor; Attaching The Stand - Dell UltraSharp 1909W AIO User Manual

Flat panel monitor for dell optiplex usff computer

Table of Contents

Back to Contents Page

Setting Up the Monitor

Dell™ 1909W AIO Flat Panel Monitor For Dell OptiPlex™ USFF Computer

Cable Connections on the Back of the Monitor and the Computer

Detaching the Monitor from the Stand

Attaching the Soundbar (optional)

Attaching the Stand

Attach the monitor to the stand:

1. Place the stand on a flat surface

2. Fit the groove on the back of the monitor onto the two metal tabs on stand.

3. Lower the monitor until it locked into place on the stand.

NOTE: The stand is detached when the monitor is shipped from the factory.

NOTE: If you want to mount your AIO stand to a desktop, see the

Cable Connections on the Back of the Monitor and the Computer

1.Slide the computer onto the stand. Push it in until the computer touches the locating tab in the stand.

2.Tighten the thumbscrews underneath the stand.

AIO Stand Template Sheet

(*.pdf)

Table of Contents