Starting Web Management - Planet IGS-5225-4T2S Quick Installation Manual

7. Starting Web Management

The following shows how to start up the Web Management of the
Industrial Managed Switch. Note the Industrial Managed Switch is
configured through an Ethernet connection. Please make sure the
manager PC must be set to the same IP subnet address.
For example, the default IP address of the Industrial Managed Switch is
192.168.0.100, then the manager PC should be set to 192.168.0.x
(where x is a number between 1 and 254, except 100), and the
default subnet mask is 255.255.255.0.
IP Address:
192.168.0.x
Logging in to the Industrial Managed Switch
1. Use Internet Explorer 8.0 or above for Web browser and enter IP
address http://192.168.0.100 (the factory-default IP address) to
access the Web interface.
2. When the following dialog box appears, please enter the default user
name "admin" and password "admin" (or the password you have
changed before) as shown in Figure 7-2.
14
RJ45/UTP-Cable
Figure 7-1: IP Management Diagram
IGS Industrial Switch
IP Address:
192.168.0.100