How To Activate The Acoustic Signal For The End Of Programme; How To Deactivate Airdry; Before First Use - Zanussi ZDT26050FA User Manual

1. Press .
• The indicators
• The indicator
• The display shows the current setting: e.g.
= level 4.
– The levels of rinse aid range from 0A to
6A.
– Level 0A means no rinse aid is used.
2. Press repeatedly to change the setting.
3. Press on/off to confirm the setting.
HOW TO ACTIVATE THE ACOUSTIC SIGNAL
FOR THE END OF PROGRAMME
Make sure the appliance is in user mode.
1. Press
• The indicators
• The indicator
• The display shows the current setting.
– = the acoustic signal is activated.
– = the acoustic signal is
deactivated.
2. Press to change the setting.
3. Press on/off to confirm the setting.

HOW TO DEACTIVATE AIRDRY

AirDry improves the drying results with less energy
consumption.

BEFORE FIRST USE

1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
Do not use detergent and do not load the
baskets.
8
, , and are off.
still flashes.
, , and are off.
still flashes.
During the drying phase, the door
opens automatically and remains ajar.
AirDry is automatically activated with all
programmes excluding Rinse & Hold (if applicable).
It is possible to deactivate it.
Make sure the appliance is in user mode.
1. Press .
The indicators: ,
indicator still flashes.
The display shows the current setting.
• = AirDry is activated.
• = AirDry is deactivated.
2. Press to change the setting.
3. Press on/off to confirm and save the setting.
CAUTION! If children have access to
the appliance, it is advised to
deactivate AirDry as opening the door
may pose a danger.
After starting a programme, it may take up to 5
minutes for the appliance to recharge the resin in
the water softener. It seems that the appliance is
not working. The washing phase starts only after
this procedure is completed. The procedure is
repeated periodically.
, and are off. The