The Salt Container; Adding Rinse Aid; Daily Use - Zanussi ZDT26050FA User Manual

THE SALT CONTAINER

CAUTION! Use rough salt designed
for dishwashers only. Fine salt
increases the risk of corrosion.
Adding salt
Before the first use, put one litre of water in the salt container.
CAUTION! Water and salt can come out of the salt container during filling. To prevent
corrosion, start a programme immediately after filling the salt container.

ADDING RINSE AID

The rinse aid helps to dry dishes without streaks ans stains. It is automatically released during the hot rinse
phase.
• Fill the rinse aid dispenser until the rinse aid dispenser reaches the marking "MAX".
• Remove the spilled rinse aid with an absorbent cloth to prevent too much foam.
• Fill the rinse aid dispenser when the indicator (A) becomes clear.

DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in programme
selection mode.
• If the salt indicator is on, fill the salt
container.
The salt is used to recharge the resin in the water
softener and to assure good washing results in
daily use.
A
• If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the
type of load and the degree of soil.
9