Output Current Sharing - HELIX MxC 200 Series Manual

MxC® 200 PoL EVB Manual

9. Output Current Sharing

The MxC 200 MuxCapacitor outputs can be wire-ORed for higher output current capacity. No
special synchronization is required. The following examples use the Single 12V Output EVB
schematic. Each individual MxC 200 cell is connected in parallel with adjacent cells: All the VIN1
pins are connected together. Similarly, all GND pins and all VOUT2 and VOUT3 pins are connected
together, respectively. The VOUT2 and VOUT3 outputs of each MxC 200 cell are connected in
parallel for maximum efficiency.
Figure 24: MxC 291 Output Current Sharing 120W 48V-to-12V Voltage Converter
1.30.19
Helix Semiconductors, 2019 All Rights Reserved 26