Warranty And Liability - Siemens SINAMICS G120 Application Description

Warranty and Liability

Warranty and Liability
The Application Examples are not binding and do not claim to be complete
Note
regarding the circuits shown, equipping and any eventuality. The Application
Examples do not represent customer-specific solutions. They are only intended
to provide support for typical applications. You are responsible for ensuring that
the described products are used correctly. These Application Examples do not
relieve you of the responsibility to use safe practices in application, installation,
operation and maintenance. When using these Application Examples, you
recognize that we cannot be made liable for any damage/claims beyond the
liability clause described. We reserve the right to make changes to these
Application Examples at any time without prior notice.
If there are any deviations between the recommendations provided in these
Application Examples and other Siemens publications – e.g. Catalogs – the
contents of the other documents have priority.
We do not accept any liability for the information contained in this document.
Any claims against us – based on whatever legal reason – resulting from the use of
the examples, information, programs, engineering and performance data etc.,
described in this Application Example shall be excluded. Such an exclusion shall
not apply in the case of mandatory liability, e.g. under the German Product Liability
Act ("Produkthaftungsgesetz"), in case of intent, gross negligence, or injury of life,
body or health, guarantee for the quality of a product, fraudulent concealment of a
deficiency or breach of a condition which goes to the root of the contract
("wesentliche Vertragspflichten"). The damages for a breach of a substantial
contractual obligation are, however, limited to the foreseeable damage, typical for
the type of contract, except in the event of intent or gross negligence or injury to
life, body or health. The above provisions do not imply a change of the burden of
proof to your detriment.
Any form of duplication or distribution of these Application Examples or excerpts
hereof is prohibited without the expressed consent of Siemens Industry Sector.
Caution
The functions and solutions described in this entry predominantly confine
themselves to the realization of the automation task. Please also take into account
that corresponding protective measures have to be taken in the context of
Industrial Security when connecting your equipment to other parts of the plant, the
enterprise network or the Internet. For more information, please refer to Entry ID
50203404.
http://support.automation.siemens.com/WW/view/en/50203404
Siemens Industry Online Support
This entry is taken from Siemens Industry Online Support. The following link takes
you directly to the download page of this document:
http://support.automation.siemens.com/WW/view/en/78788716
SINAMICS G120 as a Speed Axis on the S7-1500
V1.0a, Entry ID: 78788716
2