Suburban DynaPack S Series Architects And Engineers' Manual page 41

SUBURBAN WILL NOT BE RESPONSIBLE FOR:
1. Normal maintenance as outlined in the owner's installation, operating
and service instructions manual including cleaning of component parts;
such as, orifices and burners.
2. Failure to start and/or operate due to voltage or gas conditions, blown
fuses, open circuit breakers, loose or disconnected wires, low gas pressure
or other damages due to inadequacy or interruption or electrical service
or gas supply.
3. Damage or repairs required as a consequence of faulty or incorrect
installation not in conformance with Suburban instructions.
4. Damage as a result of floods, winds, lightning, accidents, corrosive
atmosphere or other conditions beyond the control of Suburban.
5. Costs incurred in gaining access to the furnace.
6. Parts or accessories not supplied by Suburban.
7. Damage or repairs needed as a consequence of any misapplication,
abuse, unreasonable use, unauthorized alteration, improper service,
improper operation or failure to provide reasonable and necessary
maintenance.
8. Freight charges incurred from parts replacements.
9. Fuel or electricity costs or increases in such costs from any reason
whatsoever.
10. Suburban products whose serial number has been altered, defaced or
removed.
11. Suburban products installed or warranty claims originating outside the
Continental U.S.A., Alaska, Hawaii and Canada.
12. ANY SPECIAL, INDIRECT OR CONSEQUENTIAL PROPERTY,
ECONOMIC OR COMMERCIAL DAMAGE OF ANY NATURE
WHATSOEVER. Some states do not allow the exclusion of incidental or
consequential damages, so the above limitation may not apply to you.
NO REPRESENTATIVE, DEALER OR OTHER PERSON IS AUTHORIZED TO
ASSUME FOR SUBURBAN MANUFACTURING COMPANY ANY ADDITIONAL,
DIFFERENT OR OTHER LIABILITY IN CONNECTION WITH THE SALE OF
THIS SUBURBAN PRODUCT.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
IF YOU HAVE A PRODUCT PROBLEM
FIRST:
Contact the installer of the equipment or the selling dealer for warranty
service. You may find his name on the product or with your homeowners
manual.
If his name is not known, call your builder or general contractor if yours is
a new structure.
SECOND:
Contact the Suburban distributor who supplied the product to the installer/
dealer.
THIRD:
Contact: Suburban Applied Products
41
Suburban Applied Products
Customer Service Department
156 Seedling Drive
Cordele, GA 31015
(229) 273-3636
Fax: (229) 273-5154
www.SuburbanHVACProducts.com
Suburban DynaPack A&E Manual 07/2019 Rev.6