Table of Contents
Advertisement
Available languages
Available languages
Mounting advice
Before you start installing the equipment, ensure that all necessary safety measures have been
taken.
Mounting
Place the machine on a smooth mounting plate or aligned tensioning rails and tighten the securing screws
evenly.
Before you start, make sure that:
- the operator is not damaged and not disabled
- the operator has been made ready for use again if it has been in storage for a longer period
- the input lead is disconnected and secured against being reconnected (VDE guidelines)
- all connections have been properly made
- the rotational direction of the geared motor is correct
- alle Motorschutzeinrichtungen aktiv sind
- all motor protection equipment is active
Assembly arrangement
Installation advice
Electrical connection
The connection in accordance with the circuit diagram and the servicing of ann electrical drive may only be
carried out by an electrician.
5
Hide quick links:
Advertisement
Chapters
Table of Contents
